PVC-Extrusion Line (Weber and Battenfeld), used and in working condition
Total price: EUR 59.500,-

Complete extrusion line (No.2) for production of Rigid-PVC-Profiles, consisting of:

Twin screw extruder, parallel
Manufacturer: Weber
Type: DS 85
Year of manufacture: 1991
Serial number: DS85-830
Screw diameter: 2 x 85 mm (parallel)
Screw length: 17 x D
Screw speed: max. 30 rpm
Drive power: 38 kW
Total torque: 12000 Nm
Control: Temperature control with single control units
Equipment: Suction conveyor, material hopper, dosing feeder,
vacuum pump incl. degassing system,
melt pressure sensor and melt temperature sensor
Output capacity: max. ap. 120 kg/h for Rigid-PVC, depending on material

Vacuum calibration unit
Manufacturer: Home made
Type: 4000 mm long
Year of manufacture: unknown
Serial number: —
Water tank (V2A): 4000 x 560 x 250 mm(length x width x height)
Vacuum pumps: 2 pieces
Water circulation pump: 1 piece
Equipment: electromotive length adjustment

Haul-Off
Manufacturer: Battenfeld
Type: P 160 SX / 350
Year of manufacture: 1992
Serial number: 3885
Gripping length: 1200 mm
Pads width: 350 mm
Haul-off force, max.: 12000 N
Speed: 0.3 – 8.0 m/min.

Profile saw
Manufacturer: Battenfeld
Type: SPR-125-P
Year of manufacture: 1995
Serial number: 80/0450/77/30
Profile cross section: 180 x 70 mm
Cuts, max.: 20 cuts per min.
Equipment: dust exhausting system and tilting unit

Extrusion line No.2 08.17

—————————————————————————————————————————————

PVC-Extrusion Line (Weber and Broich), used and in working condition
Total price: EUR 55.900,-

Complete extrusion line (No.3) for production of Rigid-PVC-Profiles (reconditioned in 2014),
consisting of:

Twin screw extruder, parallel
Manufacturer: Weber
Type: DS 85
Year of manufacture: 1982
Serial number: DS85-566
Screw diameter: 2 x 85 mm (parallel)
Screw length: 17 x D
Screw speed: max. 30 1/min.
Drive power: 50 kW
Total torque: 12000 Nm
Control: temperature control with single control units
Equipment: suction conveyor, material hopper, dosing feeder,
vacuum pump incl. degassing system,
melt pressure sensor and melt temperature sensor
Output capacity: max. ap. 120 kg/h for Rigid-PVC, depending on material

Vacuum calibration unit
Manufacturer: Home Made
Type: 4000 mm long
Year of manufacture: ap. 1990
Serial number: —
Water tank (V2A): 4000 x 560 x 250 mm (length x width x height)
Vacuum pumps: 2 pieces
Water circulation pump: 1 piece
Equipment: electromotive length adjustment

Haul-Off
Manufacturer: Broich
Type: unknown
Year of manufacture: ap. 1985
Serial number: —-
Gripping length: 2500 mm
Pads width: 250 mm
Haul-off force, max.: 12000 N
Speed: max. 4.0 m/min.

Cross over saw
Manufacturer: Broich / Filmac
Type: unknown
Year of manufacture: ca. 1990
Serial number: —-
Profile cross section: 250 x 60 mm
Cuts, max.: 20 cuts per min.
Equipment: dust exhausting system

Tilting unit
Contact length: 5500 mm
Contact width: 300 mm

Extrusion line No.3 08.17

Always at your disposal for further information.

Best Regards

A. Knorr GmbH

André Knorr

Here you can find our current Stocklist
KNORR Stocklist 05.2018