Latest news

Latest news

Newly Arrived

Twin Screw Extruder WEBER DS12.22
year of construction: 1990, Serial-No.: DS120-079

– expertly overhauled, with computer control system PMA (vario EC103)
with Touch-Screen-Monitor, new installed in year 2015

– incl. a second process unit
(pair of screws and barrel) in good condition

Total Price: on request

1 piece
Twin Screw Extruder, parallell
Manufacturer: Weber
Type: DS12.22
Year of construction: 1990
Serial number: DS120-079
Screw diameter: 2 x 125 mm (parallell)
Screw length: 22 x D
Screw torque: 40.000 Nm
Screw speed: 1 – 30 1/min.
Drive motor: D.C. motor
Motor power: 120 kW
Contol: computer control system with touch-screen display (PMA vario EC103)
Barrel heating-/cooling zones: 10/5
Die heating zones: 8
Heater zones: all heater elements are contolled by Solid-States-Relais
Degassing zone: 1 x vacuum pump (5.5 kW)
Connected load: 180 kW (without die)
Special equipment: melt pressure- and melt temperature sensors (new)
Output capacity: ap. 700 – 800 kg/h for PVC pipes
Diemsion: ap. 7000 x 2000 x 2100 mm (without hopper)
Weight: ap. 9.500 kg
Remark: material hopper is not included.

1 piece
Pair of screws, used in very good condition (built in)
Screw number: 025.244264.B8.472
Screw diameter: 124,6 – 125,0 mm

1 piece
Barrel, used in very good condition (built in)

1 piece
Pair of screws, used in good condition (as spare part)
Screw number: 025.173701.B15.214s
Screw diameter: 123,3 – 124,5 mm

1 piece
Barrel, used in good condition (as spare part)

1 piece
Die adapter, used in good condition

Here you will find our offer for extruder Weber DS12.22, incl. some photos:
Weber DS12.22

—————————————————————————————————————————————

Twin Screw Extruder CINCINNATI CM-55
Year of construction: 1986, Serial-No.: 16878/10

– checked on function, with processunit (screws and barrel)
like new, runnning approx. 1 year

Total Price: EUR 19.500,-

1 piece
Twin Screw Extruder, conical
Manufacturer: Cincinnati
Type: CM-55
Year of manufacure: 1986
Serial number: 16878/10
Screw diameter: 55 – 100 mm (conical)
Screw length: 1.195 mm
Screw torque: 6.439 Nm
Screw speed: 1 – 34.7 1/min.
Drive motor: D.C. motor (thyristor-controlled)
Motor power: 23.4 kW
Temperature control: 9 digital Temperature contoller
Barrel heating-/cooling zones 3/2 (oil circulation with heat exchanger)
Die heating zones: 6 incl. die adpater
Degassing zone: 1 x vacuum pump (2.2 kW)
Total connected load: 101 kW
Output capacity: ap. 120 – 140 kg/h for PVC profiles
Dimension: ap. 3700 x 1100 x 2300 mm (incl. hopper)
Weight: 3.100 kg
Special equipment: dosing unit (0.5 kW) and material hopper

Here you will find our offer for extruder Cincinnati CM-55, incl. some photos:
Cincinnati CM-55

Always at your disposal for further information.

Best Ragards

A. Knorr GmbH

André Knorr

Here you will find our current Stocklist
KNORR Stocklist 05.2018

Currently we are selling on behalf of our customer:

PVC-Extrusion Line (Weber and Battenfeld), used and in working condition
Total price: EUR 59.500,-

Complete extrusion line (No.2) for production of Rigid-PVC-Profiles, consisting of:

Twin screw extruder, parallel
Manufacturer: Weber
Type: DS 85
Year of manufacture: 1991
Serial number: DS85-830
Screw diameter: 2 x 85 mm (parallel)
Screw length: 17 x D
Screw speed: max. 30 rpm
Drive power: 38 kW
Total torque: 12000 Nm
Control: Temperature control with single control units
Equipment: Suction conveyor, material hopper, dosing feeder,
vacuum pump incl. degassing system,
melt pressure sensor and melt temperature sensor
Output capacity: max. ap. 120 kg/h for Rigid-PVC, depending on material

Vacuum calibration unit
Manufacturer: Home made
Type: 4000 mm long
Year of manufacture: unknown
Serial number: —
Water tank (V2A): 4000 x 560 x 250 mm(length x width x height)
Vacuum pumps: 2 pieces
Water circulation pump: 1 piece
Equipment: electromotive length adjustment

Haul-Off
Manufacturer: Battenfeld
Type: P 160 SX / 350
Year of manufacture: 1992
Serial number: 3885
Gripping length: 1200 mm
Pads width: 350 mm
Haul-off force, max.: 12000 N
Speed: 0.3 – 8.0 m/min.

Profile saw
Manufacturer: Battenfeld
Type: SPR-125-P
Year of manufacture: 1995
Serial number: 80/0450/77/30
Profile cross section: 180 x 70 mm
Cuts, max.: 20 cuts per min.
Equipment: dust exhausting system and tilting unit

Extrusion line No.2 08.17

—————————————————————————————————————————————

PVC-Extrusion Line (Weber and Broich), used and in working condition
Total price: EUR 55.900,-

Complete extrusion line (No.3) for production of Rigid-PVC-Profiles (reconditioned in 2014),
consisting of:

Twin screw extruder, parallel
Manufacturer: Weber
Type: DS 85
Year of manufacture: 1982
Serial number: DS85-566
Screw diameter: 2 x 85 mm (parallel)
Screw length: 17 x D
Screw speed: max. 30 1/min.
Drive power: 50 kW
Total torque: 12000 Nm
Control: temperature control with single control units
Equipment: suction conveyor, material hopper, dosing feeder,
vacuum pump incl. degassing system,
melt pressure sensor and melt temperature sensor
Output capacity: max. ap. 120 kg/h for Rigid-PVC, depending on material

Vacuum calibration unit
Manufacturer: Home Made
Type: 4000 mm long
Year of manufacture: ap. 1990
Serial number: —
Water tank (V2A): 4000 x 560 x 250 mm (length x width x height)
Vacuum pumps: 2 pieces
Water circulation pump: 1 piece
Equipment: electromotive length adjustment

Haul-Off
Manufacturer: Broich
Type: unknown
Year of manufacture: ap. 1985
Serial number: —-
Gripping length: 2500 mm
Pads width: 250 mm
Haul-off force, max.: 12000 N
Speed: max. 4.0 m/min.

Cross over saw
Manufacturer: Broich / Filmac
Type: unknown
Year of manufacture: ca. 1990
Serial number: —-
Profile cross section: 250 x 60 mm
Cuts, max.: 20 cuts per min.
Equipment: dust exhausting system

Tilting unit
Contact length: 5500 mm
Contact width: 300 mm

Extrusion line No.3 08.17

Always at your disposal for further information.

Best Regards

A. Knorr GmbH

André Knorr

Here you can find our current Stocklist
KNORR Stocklist 05.2018

Contact us!

A. Knorr GmbH
Elbestr. 19a
46395 Bocholt
Germany

Telephone: +49 (0) 2871 / 2374871
Fax: +49 (0) 2871 / 2374870
E-Mail: info[@]knorr-extrusion.de
Website: www.knorr-extrusion.de

Used machines

Sitemap